Testing & Inspection
TÜV AUSTRIA Websites > TÜV AUSTRIA English > Solution > Industry > Procedure qualification – pressure equipment Solution: Procedure qualification – pressure equipment Testing & Inspection Solution: Procedure qualification – pressure equipment Dipl.-Ing. Gerhard Höltmann Dipl.-Ing. Gerhard Höltmann Deutschstraße 10 1230 Wien Österreich +43 5 0454 6100 Send email Deutschstraße 10 1230 Wien Österreich Save to My Bundle Dipl.-Ing. Gerhard Höltmann Save to My Bundle Save to My Bundle Save to My Bundle In which region do you need this solution? All regions Accreditation All accreditations "TÜV AUSTRIA carries out procedure qualification tests for pressure equipment according to harmonised standards, such as ÖNORM EN ISO 15614." Procedure qualification The working processes for the production of permanent material connections, i.e. welded and brazed joints, must be approved by a recognised independent testing body or a notified body for pressure equipment of category II or higher. For such approval, TÜV AUSTRIA carries out tests according to harmonised standards, such as the ÖNORM EN ISO 15614 series, or equivalent tests. As a Notified Body, TÜV AUSTRIA has an accredited test laboratory to perform these procedure qualification tests, including destructive and non-destructive testing of the test pieces. More Tags: Category II Destructive testing DT Industry Manufacturer Marketing Material compound NOBO Non-destructive testing (NDT)Notified Body Notifizierte Stelle ÖNORM EN ISO 15614 Pressure equipment Procedure Solder connection Welded joint Related solutions from the same sector: Industry Liquefied gas container Industry Show more Save to my Bundle Acceptance test – pressure equipment Industry Show more Save to my Bundle High-voltage power lines Industry Show more Save to my Bundle In-service measurement Industry Show more Save to my Bundle All Solutions Discover more sectors: Agriculture Automotive Certification Communications Technology Construction & Real Estate Electronics Energy Foodstuffs Health & Medicine IT & Security Leisure & Entertainment Machinery Municipalities Science & Research Sports & Fitness Sustainability Tourism Trade & Commerce Transport & Traffic Gerhard Höltmann +43 5 0454 6100 \| gerhard.hoeltmann@tuv.at
Gerhard Höltmann +43 5 0454 6100 \| gerhard.hoeltmann@tuv.at

TÜV AUSTRIA Websites > TÜV AUSTRIA English > Solution > Industry > Procedure qualification – pressure equipment

Solution: Procedure qualification – pressure equipment

Testing & Inspection

Dipl.-Ing. Gerhard Höltmann

Deutschstraße 10 1230 Wien Österreich

+43 5 0454 6100

Send email

In which region do you need this solution?

All regions

Accreditation

All accreditations

"TÜV AUSTRIA carries out procedure qualification tests for pressure equipment according to harmonised standards, such as ÖNORM EN ISO 15614."

Procedure qualification

The working processes for the production of permanent material connections, i.e. welded and brazed joints, must be approved by a recognised independent testing body or a notified body for pressure equipment of category II or higher.

For such approval, TÜV AUSTRIA carries out tests according to harmonised standards, such as the ÖNORM EN ISO 15614 series, or equivalent tests.

As a Notified Body, TÜV AUSTRIA has an accredited test laboratory to perform these procedure qualification tests, including destructive and non-destructive testing of the test pieces.